SYSMAC NX1P2 SERİSİ MAKİNA KONTROLÖRLERİ
NX1P2, kompakt makinelere gelişmiş kontrol sunar
Üretim sektörü verimliliğini ve kaliteyi arttırır. En son teknolojiye sahip çok fonksiyonlu makinelerin kullanımı bunun çözümlerinden birisi olsa da, üretim süreçlerini optimize ederek farklı müşteri ihtiyaçlarını karşılamak için üretim verilerinden faydalanan esnek sistemler gerekir. Omron endüstriyel otomasyon, geleceğe dönük üretim süreçlerinin anahtarı olarak, küçük ve orta büyüklükteki makinelerin esnek bir üretim hattına daha hızlı adapte olabilmesini sağlar. Bu ilkeyi aklımızda tutarak, Sysmac Makine Kontrol portföyümüzü NX1P2 Makine Kontrolörünü ekleyerek genişlettik.
NX1P2 Makine Kontrolörü, aşağıdaki özellikleri sunarak üretimin verimli olmasını sağlar
- * Kaliteden ödün vermeden makine performansını artırma
- * Esnek üretime daha hızlı adapte olabilme
- * Sezgisel Entegre Geliştirme Ortamı kullanarak sonuçları daha hızlı alma
Ürünler
Döküman
Teknik Bilgiler
Resim
Video
Ürünler
Döküman
Teknik Bilgiler
NX1P2 series CPU units
|
Appearance |
Type |
Program capacity |
Memory capacity for variables |
Number of axes |
Built-in I/O points |
Order code |
||||
|
Real axes |
Motion control servo axes |
Single-axis position control servo axes |
I/O points |
Input points |
Output points |
|||||
|
|
NX1P |
1.5 MB |
32 KB (retained during power interruptions) or 2 MB (not retained during power interruptions) |
8 axes |
4 axes |
4 axes |
40 points |
24 points |
16 points NPN transistor |
NX1P2-1140DT |
|
16 points PNP transistor |
NX1P2-1140DT1 |
|||||||||
|
6 axes |
2 axes |
16 points NPN transistor |
NX1P2-1040DT |
|||||||
|
16 points PNP transistor |
NX1P2-1040DT1 |
|||||||||
|
|
4 axes |
0 axes |
24 points |
14 points |
10 points NPN transistor |
NX1P2-9024DT |
||||
|
10 points PNP transistor |
NX1P2-9024DT1 |
|||||||||
Note: The end cover unit NX-END02 is included with the CPU unit.
Option boards
|
Appearance |
Type |
Specifications |
Supported protocol |
Order code |
|
|
Serial communications |
1 × RS-232C port Transmission distance: 15 m Connection type: Screwless push-in terminal block (9 terminals) |
Host link, Modbus-RTU master and no-protocol |
NX1W-CIF01 |
|
|
1 × RS-422A/485 port Transmission distance: 50 m Connection type: Screwless push-in terminal block (5 terminals) |
NX1W-CIF11 |
||
|
1 × RS-422A/485 port (isolated) Transmission distance: 500 m Connection type: Screwless push-in terminal block (5 terminals) |
NX1W-CIF12 |
|||
|
|
Analog I/O |
2 × Analog input Voltage input: 0 to 10 V (Resolution: 1/4,000) Current input: 0 to 20 mA (1/2,000) Connection type: Screwless push-in terminal block (5 terminals) |
NX1W-ADB21 |
|
|
|
2 × Analog output Voltage output: 0 to 10 V (Resolution: 1/4,000) Connection type: Screwless push-in terminal block (3 terminals) |
NX1W-DAB21V |
||
|
|
2 × Analog input / 2 × Analog output Voltage input: 0 to 10 V (Resolution: 1/4,000) Current input: 0 to 20 mA (1/2,000) Voltage output: 0 to 10 V (Resolution: 1/4,000) Connection type: Screwless push-in terminal block (8 terminals) |
NX1W-MAB221 |
||
NX I/O units (local and remote I/O)
Up to 8 local NX I/O units can be connected to an NX1P CPU unit. The NX-Safety units must be used in combination with the EtherCAT communication coupler unit.
Communication and control units
|
Module Type |
Protocol |
Connection |
Specification |
Width |
Order code |
|
|
Communication coupler |
EtherCAT Slave |
2 RJ45 ports (in + out) |
Up to 63 I/O units. Max. 1,024 bytes in + 1,024 bytes out Supports distributed clock I/O power supply up to 10 A |
46 mm |
NX-ECC203 |
|
|
Safety controller |
FSoE Protocol |
128 Safety connections |
For up to 1,024 safety I/O points |
30 mm |
NX-SL3500 |
|
|
32 Safety connections |
For up to 256 safety I/O points |
30 mm |
NX-SL3300 |
|
Digital I/O units
|
Module type |
Channels, Signal type |
Performance , I/O Refresh Mode |
Connection type |
Width |
Order code |
NPN-type |
|
AC Digital Input |
4 inputs, 200 to 240 VAC, 50/60 Hz |
Free Run |
Screwless push-in (NX-TBA082) |
12 mm |
NX-IA3117 |
− |
|
Safety Digital Input |
4 inputs + 2 test outputs |
Free Run |
Screwless push-in (NX-TBA082) |
12 mm |
NX-SIH400 |
− |
|
8 inputs + 2 test outputs |
Free Run |
Screwless push-in (NX-TBA162) |
12 mm |
NX-SID800 |
− |
|
|
DC Digital Input |
4 inputs, 3-wire connection |
High-speed Synchronous Time Stamp |
Screwless push-in (NX-TBA122) |
12 mm |
NX-ID3444 |
NX-ID3344 |
|
High-speed Synchronous/Free Run |
Screwless push-in (NX-TBA122) |
12 mm |
NX-ID3443 |
NX-ID3343 |
||
|
Synchronous/Free Run |
Screwless push-in (NX-TBA122) |
12 mm |
NX-ID3417 |
NX-ID3317 |
||
|
8 inputs, 2-wire connection |
Synchronous/Free Run |
Screwless push-in (NX-TBA162) |
12 mm |
NX-ID4442 |
NX-ID4342 |
|
|
16 inputs, 1-wire connection |
Synchronous/Free Run |
Screwless push-in (NX-TBA162) |
12 mm |
NX-ID5442 |
NX-ID5342 |
|
|
1 × 20-pin MIL connector |
30 mm |
NX-ID5142-5 |
same |
|||
|
M3 screw |
30 mm |
NX-ID5142-1 |
same |
|||
|
32 inputs, 1-wire connection |
Synchronous/Free Run |
1 × 40-pin MIL connector |
30 mm |
NX-ID6142-5 |
same |
|
|
1 × 40-pin Fujitsu connector |
30 mm |
NX-ID6142-6 |
same |
|||
|
DC Digital I/O |
16 inputs + 16 outputs 0.5 A, |
Synchronous/Free Run |
2 × 20-pin MIL connector |
30 mm |
NX-MD6256-5 |
NX-MD6121-5 |
|
2 × 24-pin Fujitsu connector |
30 mm |
− |
NX-MD6121-6 |
|||
|
DC Digital Output |
2 outputs 0.5 A, 3-wire connection |
High-speed Synchronous Time Stamp |
Screwless push-in (NX-TBA082) |
12 mm |
NX-OD2258 |
NX-OD2154 |
|
4 outputs 0.5 A, 3-wire connection |
High-speed Synchronous/Free Run |
Screwless push-in (NX-TBA122) |
12 mm |
NX-OD3257 |
NX-OD3153 |
|
|
Synchronous/Free Run |
Screwless push-in (NX-TBA122) |
12 mm |
NX-OD3256 |
NX-OD3121 |
||
|
4 outputs 2 A/point, 8 A total, 3-wire connection |
Synchronous/Free Run |
Screwless push-in (NX-TBA162) |
12 mm |
NX-OD3268 |
− |
|
|
8 outputs 0.5 A, 2-wire connection |
Synchronous/Free Run |
Screwless push-in (NX-TBA162) |
12 mm |
NX-OD4256 |
NX-OD4121 |
|
|
16 outputs 0.5 A, 1-wire connection |
Synchronous/Free Run |
Screwless push-in (NX-TBA162) |
12 mm |
NX-OD5256 |
NX-OD5121 |
|
|
1 × 20-pin MIL connector |
30 mm |
NX-OD5256-5 |
NX-OD5121-5 |
|||
|
M3 screw |
30 mm |
NX-OD5256-1 |
NX-OD5121-1 |
|||
|
32 outputs 0.5 A, 1-wire connection |
Synchronous/Free Run |
1 × 40-pin MIL connector |
30 mm |
NX-OD6256-5 |
NX-OD6121-5 |
|
|
1 × 40-pin Fujitsu connector |
30 mm |
− |
NX-OD6121-6 |
|||
|
Safety Digital Output |
2 outputs, 2.0 A |
Free Run |
Screwless push-in (NX-TBA082) |
12 mm |
NX-SOH200 |
− |
|
4 outputs, 0.5 A |
Free Run |
Screwless push-in (NX-TBA082) |
12 mm |
NX-SOD400 |
− |
|
|
Relay Digital Output |
2 outputs, N.O., 2.0 A |
Free Run |
Screwless push-in (NX-TBA082) |
12 mm |
NX-OC2633 |
− |
|
8 outputs, N.O., 2.0 A |
Free Run |
Screwless push-in (NX-TBA082 × 2) |
24 mm |
NX-OC4633 |
− |
|
|
2 outputs, N.O.+ N.C., 2.0 A |
Free Run |
Screwless push-in (NX-TBA082) |
12 mm |
NX-OC2733 |
− |
Position control units
|
Module type |
Channels, Signal type |
Performance, I/O Refresh Mode |
Connection type |
Width |
Order code |
NPN-type |
|
Encoder Input |
1 SSI encoder, 2 MHz |
Synchronous/Free Run |
Screwless push-in (NX-TBA122) |
12 mm |
NX-ECS112 |
− |
|
2 SSI encoders, 2 MHz |
Synchronous/Free Run |
Screwless push-in (NX-TBA122) |
12 mm |
NX-ECS212 |
− |
|
|
1 incremental encoder line driver 4 MHz + 3 Digital Inputs (1 µs) |
Synchronous/Free Run |
Screwless push-in (NX-TBA122 + |
24 mm |
NX-EC0142 |
NX-EC0132 |
|
|
1 incremental encoder open collector 500 kHz + 3 Digital Inputs (1 µs) |
Synchronous/Free Run |
Screwless push-in (NX-TBA162) |
12 mm |
NX-EC0122 |
NX-EC0112 |
|
|
2 incremental encoders open collector 500 kHz |
Synchronous/Free Run |
Screwless push-in (NX-TBA122) |
12 mm |
NX-EC0222 |
NX-EC0212 |
|
|
Pulse Output |
1 Pulse Up/Down or Pulse/Direction open collector 500 kHz + 2 Digital Inputs + 1 Digital Output (1 µs) |
Synchronous |
Screwless push-in (NX-TBA162) |
12 mm |
NX-PG0122 |
NX-PG0112 |
|
2 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel |
1 × 34-pin MIL connector |
30 mm |
NX-PG0242-5 |
NX-PG0232-5 |
||
|
4 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel |
2 × 34-pin MIL connector |
30 mm |
NX-PG0342-5 |
NX-PG0332-5 |
Serial Communication Interface Units
|
Module type |
Channels, Signal type |
Performance, I/O Refresh Mode |
Connection type |
Width |
Order code |
NPN-type |
|
Serial Communication |
1 × RS-422A/485 |
Free Run |
Screwless push-in (NX-TBC162) |
12 mm |
NX-CIF105 |
− |
|
1 × RS-232C |
Free Run |
Screwless push-in (NX-TBC162) |
12 mm |
NX-CIF101 |
− |
|
|
2 × RS-232C |
Free Run |
9-pin D-sub |
30 mm |
NX-CIF210 |
− |
|
Digital I/O performance |
Standard |
High Speed |
|||
|
ON delay |
OFF delay |
ON delay |
OFF delay |
||
|
Input |
PNP |
0.02 ms |
0.4 ms |
100 ns |
100 ns |
|
NPN |
|||||
|
AC |
10 ms |
40 ms |
N.A. |
N.A. |
|
|
Output |
PNP |
0.5 ms |
1.0 ms |
300 ns |
300 ns |
|
NPN |
0.1 ms |
0.8 ms |
|||
|
Relay |
15 ms |
15 ms |
N.A. |
N.A. |
|
Analog I/O Units
|
Module type |
Signal type |
Performance, I/O Refresh Mode |
Channels |
Connection type |
Width |
Order code |
|
Temperature Sensor Input |
Thermocouple type |
0.1°C resolution, 200 ms/unit |
2 |
Screwless push-in terminal block(s) with cold junction sensor, calibrated individually at the factory |
12 mm |
NX-TS2101 |
|
4 |
24 mm |
NX-TS3101 |
||||
|
0.01°C resolution, 10 ms/unit |
2 |
12 mm |
NX-TS2102 |
|||
|
4 |
24 mm |
NX-TS3102 |
||||
|
0.001°C resolution, 60 ms/unit |
2 |
12 mm |
NX-TS2104 |
|||
|
4 |
24 mm |
NX-TS3104 |
||||
|
RTD type |
0.1°C resolution, 200 ms/unit |
2 |
Screwless push-in (NX-TBA162) |
12 mm |
NX-TS2201 |
|
|
4 |
Screwless push-in (NX-TBA162 + |
24 mm |
NX-TS3201 |
|||
|
0.01°C resolution, 10 ms/unit |
2 |
Screwless push-in (NX-TBA162) |
12 mm |
NX-TS2202 |
||
|
4 |
Screwless push-in (NX-TBA162 + |
24 mm |
NX-TS3202 |
|||
|
0.001°C resolution, 60 ms/unit |
2 |
Screwless push-in (NX-TBA162) |
12 mm |
NX-TS2204 |
||
|
4 |
Screwless push-in (NX-TBA162 + |
24 mm |
NX-TS3204 |
|||
|
Analog Input |
4 to 20 mA |
1/8000 resolution, 250 µs/channel |
2 |
Screwless push-in (NX-TBA082) |
12 mm |
NX-AD2203 |
|
4 |
Screwless push-in (NX-TBA122) |
12 mm |
NX-AD3203 |
|||
|
8 |
Screwless push-in (NX-TBA162) |
12 mm |
NX-AD4203 |
|||
|
4 to 20 mA |
1/8000 resolution, 250 µs/channel |
2 |
Screwless push-in (NX-TBA082) |
12 mm |
NX-AD2204 |
|
|
4 |
Screwless push-in (NX-TBA122) |
12 mm |
NX-AD3204 |
|||
|
8 |
Screwless push-in (NX-TBA162) |
12 mm |
NX-AD4204 |
|||
|
1/30000 resolution,10 µs/channel |
2 |
Screwless push-in (NX-TBA082) |
12 mm |
NX-AD2208 |
||
|
4 |
Screwless push-in (NX-TBA122) |
12 mm |
NX-AD3208 |
|||
|
8 |
Screwless push-in (NX-TBA162) |
12 mm |
NX-AD4208 |
|||
|
−10 to 10 V |
1/8000 resolution, 250 µs/channel |
2 |
Screwless push-in (NX-TBA082) |
12 mm |
NX-AD2603 |
|
|
4 |
Screwless push-in (NX-TBA122) |
12 mm |
NX-AD3603 |
|||
|
8 |
Screwless push-in (NX-TBA162) |
12 mm |
NX-AD4603 |
|||
|
−10 to 10 V |
1/8000 resolution, 250 µs/channel |
2 |
Screwless push-in (NX-TBA082) |
12 mm |
NX-AD2604 |
|
|
4 |
Screwless push-in (NX-TBA122) |
12 mm |
NX-AD3604 |
|||
|
8 |
Screwless push-in (NX-TBA162) |
12 mm |
NX-AD4604 |
|||
|
1/30000 resolution,10 µs/channel |
2 |
Screwless push-in (NX-TBA082) |
12 mm |
NX-AD2608 |
||
|
4 |
Screwless push-in (NX-TBA122) |
12 mm |
NX-AD3608 |
|||
|
8 |
Screwless push-in (NX-TBA162) |
12 mm |
NX-AD4608 |
|||
|
Analog Output |
4 to 20 mA |
1/8000 resolution, 250 µs/channel |
2 |
Screwless push-in (NX-TBA082) |
12 mm |
NX-DA2203 |
|
4 |
Screwless push-in (NX-TBA122) |
12 mm |
NX-DA3203 |
|||
|
1/30000 resolution,10 µs/channel |
2 |
Screwless push-in (NX-TBA082) |
12 mm |
NX-DA2205 |
||
|
4 |
Screwless push-in (NX-TBA122) |
12 mm |
NX-DA3205 |
|||
|
−10 to 10 V |
1/8000 resolution, 250 µs/channel |
2 |
Screwless push-in (NX-TBA082) |
12 mm |
NX-DA2603 |
|
|
4 |
Screwless push-in (NX-TBA122) |
12 mm |
NX-DA3603 |
|||
|
1/30000 resolution,10 µs/channel |
2 |
Screwless push-in (NX-TBA082) |
12 mm |
NX-DA2605 |
||
|
4 |
Screwless push-in (NX-TBA122) |
12 mm |
NX-DA3605 |
Load cell input
|
Module type |
Specifications |
Excitation voltage/input range |
I/O refresh method |
Connection type |
Width |
Order code |
|
Load cell input |
1 load cell input, 125 µs conversion cycle |
5 VDC ±10%/−5 to 5 mV/V |
Synchronous/Free Run |
Screwless push-in (NX-TBC162) |
12 mm |
NX-RS1201 |
Heater burnout detection
|
Module type |
Channels, signal type |
Control output |
I/O refresh method |
Connection type |
Width |
Order code |
|
Heater burnout detection |
4 CT inputs |
NPN, 12 to 24 VDC |
Free Run |
Screwless push-in (NX-TBA162) |
12 mm |
NX-HB3101 |
|
PNP 24 VDC |
Screwless push-in (NX-TBA162) |
12 mm |
NX-HB3201 |
Other units
|
Module type |
Description |
Connection type |
Width |
Order code |
|
Power Unit |
NX bus power supply unit, 24 V DC input, non-isolated |
Screwless push-in (NX-TBC082) |
12 mm |
NX-PD1000 |
|
I/O power feed unit, for separation of power groups, up to 10 A |
Screwless push-in (NX-TBA082) |
12 mm |
NX-PF0730 |
|
|
I/O power connection unit, 16 × IOV |
Screwless push-in (NX-TBA162) |
12 mm |
NX-PC0020 |
|
|
I/O power connection unit, 16 × IOG |
Screwless push-in (NX-TBA162) |
12 mm |
NX-PC0010 |
|
|
I/O power connection, 8 × IOV + 8 x IOG |
Screwless push-in (NX-TBA162) |
12 mm |
NX-PC0030 |
|
|
System Units and Accessories |
Grounding terminal, 16 points |
Screwless push-in (NX-TBC162) |
12 mm |
NX-TBX01 |
|
End cover (included with Communication Coupler) |
− |
12 mm |
NX-END01 |
|
|
Replacement front connector with 8 wiring terminals (marked A+B) |
Screwless push-in |
12 mm |
NX-TBA082 |
|
|
Replacement front connector with 12 wiring terminals (marked A+B) |
Screwless push-in |
12 mm |
NX-TBA122 |
|
|
Replacement front connector with 16 wiring terminals (marked A+B) |
Screwless push-in |
12 mm |
NX-TBA162 |
|
|
Replacement front connector with 12 wiring terminals (marked C+D) |
Screwless push-in |
12 mm |
NX-TBB122 |
|
|
Replacement front connector with 16 wiring terminals (marked C+D) |
Screwless push-in |
12 mm |
NX-TBB162 |
|
|
Replacement front connector with 8 wiring terminals (marked A+B+FG) |
Screwless push-in |
12 mm |
NX-TBC082 |
|
|
Replacement front connector with 16 wiring terminals (marked A+B+FG) |
Screwless push-in |
12 mm |
NX-TBC162 |
|
|
DIN rail insulation spacers, set of 3 pcs |
− |
NX-AUX01 |
||
|
30 Unit pins + 30 Terminal keying pins, to prevent mismatch of unit and terminal block (one set is enough for 10 units) |
− |
NX-AUX02 |
||
Recommended EtherCAT and EtherNet/IP communication cables
|
Item |
Manufacturer |
Color |
Cable |
Order code |
||
|
EtherCAT cable |
Cat 5e, AWG22, 2-pair cable M12/Smartclick connectors Improved shield for EtherCAT |
Standard type Cable with connectors on both ends (M12 straight/M12 straight) |
OMRON |
Black |
0.5 |
XS5W-T421-BM2-SS |
|
1 |
XS5W-T421-CM2-SS |
|||||
|
2 |
XS5W-T421-DM2-SS |
|||||
